Removal - Suzuki GSX1400 Service Manual

REMOVAL

• Loosen the rear axle nut 1.
• Raise the rear wheel off the ground and support the motor-
cycle with the center stand.
• Remove the axle nut and draw out the rear axle.
Do not operate the brake pedal while removing the rear
wheel.
• Remove the collar 2.
• Draw out the rear sprocket mounting drum 3 from the wheel
hub.
NOTE:
Before removing the rear sprocket mounting drum, slightly loosen
the rear sprocket nuts.
• Remove the rear sprocket mounting drum retainer 4.
• Separate the rear sprocket from its mounting drum by remov-
ing nuts.
• Remove the dust seal by using special tool.
09913-50121: Oil seal remover
Never reuse the removed dust seal.
• Remove the brake disc.
www.GSX1400FE.com
CHASSIS 6-33