5-8
OIL COOLING AND LUBRICATION SYSTEM
OIL HOSE/OIL PIPE INSPECTION
• Any oil hose/oil pipe found in a cracked condition or flattened
must be replaced.
• Any leakage from the connecting section should be corrected
by proper tightening.
OIL COOLER INSTALLATION
• Install the oil cooler.
• Use a new O-ring and install the oil hoses.
Use a new O-ring to prevent engine oil leakage.
99000-25010: SUZUKI SUPER GREASE "A"
NOTE:
Apply grease "A" to the O-ring.
• Tighten the oil cooler hose bolts to the specified torque.
Oil cooler hose bolt: 10 N . m (1.0 kgf . m, 7.3 lb-ft)
• Pour engine oil. (
2-13)
COOLING FAN
REMOVAL
• Drain engine oil. (
• Remove the oil cooler. (
• Remove the cooling fan.
www.GSX1400FE.com
2-13)
5-7)