Suzuki GSX1400 Service Manual page 116

3-76 ENGINE
• Apply molybdenum oil solution to journals and cam faces.
MOLYBDENUM OIL SOLUTION
• Install each dowel pin.
• Install the camshaft journal holders by aligning the embossed
letters on the camshaft journal holders with the embossed let-
ters on the cylinder head.
• Fasten the camshaft journal holders evenly by tightening the
camshaft journal holder bolts sequentially and diagonally.
Camshaft journal holder bolt: 10 N . m
NOTE:
Damage to head or camshaft journal holder thrust surfaces may
result if the camshaft journal holders are not drawn down evenly.
Cam chain tension adjuster
• Retract the push rod by pushing the stopper.
• Install the cam chain tension adjuster with new gasket.
Cam chain tension adjuster mounting bolt: 10 N . m
• Install the steel ball, the spring, the gasket washer and cam
chain tension adjuster cap to the cam chain tension adjuster.
Cam chain tension adjuster cap:
NOTE:
Click sound is heard when the cam chain tension adjuster cap
bolt is installed.
www.GSX1400FE.com
(1.0 kgf . m, 7.4 lb-ft)
(1.0 kgf . m, 7.4 lb-ft)
35 N . m (3.5 kgf . m, 26 lb-ft)