Suzuki GSX1400 Service Manual page 110

3-70 ENGINE
• Pass the signal generator lead wire through the crankcase hole.
BREATHER COVER
• Install the gasket.
• Install the breather cover.
Breather cover bolt: 10 N . m (1.0 kgf . m, 7.4 lb-ft)
NOTE:
Install the engine ground lead wire and clamp to the bolt A .
STARTER MOTOR
• Apply grease to the O-ring and install the starter motor.
99000-25010: SUZUKI SUPER GREASE "A"
Starter motor mounting bolt: 6 N . m (0.6 kgf . m, 4.4 lb-ft)
OIL TEMPERATURE SENSOR
• Apply grease to the O-ring and install the oil temperature sen-
sor.
Oil temperature sensor bolt: 10 N . m (1.0 kgf . m, 7.4 lb-ft)
www.GSX1400FE.com