6-54 CHASSIS
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain the brake fluid. (
• Remove the rear view mirror.
• Disconnect the front brake light switch lead wire coupler 1.
• Place a rag underneath the union bolt on the master cylinder to
catch any spilt brake fluid. Remove the brake hose union bolt
and disconnect the brake hose.
Immediately and completely wipe off any brake fluid con-
tacting any part of the motorcycle. The fluid reacts chemi-
cally with paint, plastics and rubber materials, etc. and
will damage them severely.
• Remove the master cylinder by removing the master cylinder
mounting bolts.
• Remove the brake lever 2 and brake switch 3.
• Pull out the dust boot 4 and remove the circlip 5.
09900-06108: Snap ring pliers
www.GSX1400FE.com
6-50)