Clutch Master Cylinder Removal And Disassembly - Suzuki GSX1400 Service Manual

• Tighten each bolts to the specified torque.
Clutch hose union bolt 1: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
Air bleeder valve 2: 8.0 N . m (0.8 kgf . m, 6.0 lb-ft)
* The seal washers should be replaced by the new ones
to prevent fluid leakage.
* Bleed air from the system after reassembling the re-
lease cylinder. (
CLUTCH MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Drain the clutch fluid. (
• Disconnect the clutch lever position switch lead wires.
• Place a rag underneath the union bolt on the master cylinder to
catch spilled drops of brake fluid. Remove the union bolt and
disconnect the clutch hose from the master cylinder.
Completely wipe off any brake fluid adhering to any parts
of motorcycle. The fluid reacts chemically with paint, plas-
tics, rubber materials, etc. and will damage them severely.
• Remove the clutch master cylinder.
www.GSX1400FE.com
2-17)
6-65)
CHASSIS 6-67