Suzuki GSX1400 Service Manual page 104

3-64 ENGINE
GENERATOR COVER
• Apply SUZUKI BOND lightly to the mating surfaces at the part-
ing line between the upper and lower crankcases as shown.
99000-31140: SUZUKI BOND "1207B"
• Install the dowel pins and new gasket.
• Install the generator cover and tighten the generator cover bolts
to the specified torque.
Generator cover bolt: 11 N . m (1.1 kgf . m, 8.1 lb-ft)
Be careful not to pinch the finger between the generator
cover and the crankcase.
NOTE:
Fit the gasket washer to the bolts A .
GEARSHIFT SYSTEM
• Install the gearshift cam stopper, its bolt, the washer and the
return spring.
99000-32050: THREAD LOCK "1342"
Gearshift cam stopper bolt: 10 N . m (1.0 kgf . m, 7.4 lb-ft)
• Hook the return spring end to the stopper.
www.GSX1400FE.com