Suzuki GSX1400 Service Manual page 122

FUSE
• When a fuse blows, always investigate the cause, correct it
and then replace the fuse.
• Do not use a fuse of a different capacity.
• Do not use wire or any other substitute for the fuse.
ECM/VARIOUS SENSORS
• Since each component is a high-precision part, great care
should be taken not to apply any sharp impacts during removal
and installation.
• Be careful not to touch the electrical terminals of the ECM. The
static electricity from your body may damage this part.
• When disconnecting and connecting the ECM couplers, make
sure to turn OFF the ignition switch, or electronic parts may get
damaged.
• Battery connection in reverse polarity is strictly prohibited. Such
a wrong connection will damage the components of the FI sys-
tem instantly when reverse power is applied.
www.GSX1400FE.com
FI SYSTEM 4-3
INCORRECT
Ignition S/W
INCORRECT