Suzuki GSX1400 Service Manual page 118

3-78 ENGINE
CYLINDER HEAD COVER
• Pour engine oil in each oil pocket in the cylinder head.
NOTE:
Be sure to check the valve clearance. (
• Install the new gaskets to the cylinder head cover.
• Apply SUZUKI BOND to the cam end caps of the gaskets as
shown.
99000-31230: SUZUKI BOND "1216B"
• Place the cylinder head cover on the cylinder head.
• Fit the new gaskets to head cover bolts (8 mm).
• Tighten the head cover bolts to the specified torque.
Head cover bolt (8 mm): 20 N . m (2.0 kgf . m, 15 lb-ft)
• Apply a small quantity of engine oil to the gasket.
• Tighten the head cover bolts (7 mm) to the specified torque.
Head cover bolt (7 mm): 14 N . m (1.4 kgf . m, 10.0 lb-ft)
• Apply grease to the O-ring and install the oil hose.
Oil hose union bolt: 10 N . m (10 kgf . m, 7.4 lb-ft)
99000-25010: SUZUKI SUPER GREASE "A"
PAIR REED VALVE
• Install the PAIR reed valve and its cover.
PAIR reed valve cover bolt: 10 N . m (1.0 kgf . m, 7.4 lb-ft)
www.GSX1400FE.com
2-6)