Suzuki GSX1400 Service Manual page 69

VALVE GUIDE SERVICING
• Using the valve guide remover, drive the valve guide out to-
ward the intake or exhaust camshaft side.
! 09916-53310: Valve guide remover/installer
NOTE:
* Discard the removed valve guide subassemblies.
* Only oversized valve guides are available as replacement parts.
(Part No. 11115-18D72)
• Refinish the valve guide holes in cylinder head with the reamer
and handle.
! 09916-34580: Valve guide reamer
09916-34542: Reamer handle
"
When refinishing or removing the reamer from the valve
guide hole, always turn it clockwise.
• Apply engine oil to the valve guide hole.
• Drive the valve guide into the hole using the special tool.
! 09916-43210: Valve guide installer/remover
NOTE:
Install the valve guide until the ring A contacts with the cylinder
head.
"
Failure to oil the valve guide hole before driving the new
guide into place may result in a damaged guide or head.
• After installing the valve guides, refinish their guiding bores us-
ing the reamer.
• Clean and oil the guides after reaming.
! 09916-33310: Valve guide reamer
09916-34542: Valve guide reamer handle
NOTE:
Insert the reamer from the combustion chamber and always turn
the reamer handle clockwise.
www.GSX1400FE.com
ENGINE 3-29