Suzuki GSX1400 Service Manual page 256

6-56 CHASSIS
• Apply brake fluid to the piston and cups.
• Install the following parts to the master cylinder.
1 Dust boot
2 Circlip
3 Secondary cup
4 Piston
5 Primary cup
6 Return spring
09900-06108: Snap ring plires
• When remounting the brake master cylinder onto the handle-
bar, align the master cylinder holder's mating surface A with
punched mark B on the handlebars and tighten the upper clamp
bolt first as shown.
Front brake master cylinder mounting bolt: 10 N . m
• Tighten the union bolt.
(Brake hose routing:
Brake hose union bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
* The seal washers should be replaced by the new ones
to prevent fluid leakage.
* Bleed air from the system after reassembling the mas-
ter cylinder. ( 2-21)
INSPECTION AFTER REASSEMBLY
• Front brake: 2-19
www.GSX1400FE.com
(1.0 kgf . m, 7.3 lb-ft)
8-22)