Suzuki GSX1400 Service Manual page 107

• Insert the spring washer seat 1 and the spring washer 2.
• Insert the clutch drive plates and driven plates one by one into
the clutch sleeve hub in the prescribed order as shown in the
illustration.
NOTE:
Insert the outermost No.2 drive plate claws to the other slits of
clutch housing as shown.
Drive plate Number
A No.1
B No.2
C No.3
• Install the clutch push rod 1 into the countershaft.
• Install the clutch push piece 2, the bearing 3 and the thrust
washer 4 to the countershaft.
www.GSX1400FE.com
I.D. Number of
friction plate
8 101mm
1 101mm
1 108mm
48
36
48
ENGINE 3-67
Outside
Friction plate