Remounting; Final Inspection And Adjustment - Suzuki GSX1400 Service Manual

6-48 CHASSIS

REMOUNTING

Remount the swingarm in the reverse order of disassembly and
removal, and pay attention to the following points:
SWINGARM
• Insert the swingarm pivot shaft and tighten it to the specified
torque.
Swingarm pivot nut: 120 N . m (12.0 kgf . m, 87.0 lb-ft)
• Install the pivot shaft caps.
• Install the touque link.
Touque link bolt/nut: 28 N . m (2.8 kgf . m, 20.5 lb-ft)
• Install the rear shock absorbers. (
• Install the rear brake hose guide.
• Install the rear wheel. (
• Install the rear brake hose with the proper brake hose routing.
(Rear brake hose routing:
Brake hose union bolt: 23 N . m (2.3 kgf . m, 16.5 lb-ft)
Bleed air from the brake system. (

FINAL INSPECTION AND ADJUSTMENT

After installing the rear suspension and wheel, the following ad-
justments are required before driving.
* Drive chain: 2-17
* Tire pressure: 6-72
* Chassis bolts and nuts:
www.GSX1400FE.com
6-42)
6-36)
8-23)
2-22)
2-25