Suzuki GSX1400 Service Manual page 229

• Install the ignition switch. (
• Install the handlebar holders to the steering stem upper bracket.
NOTE:
Tighten the handlebar holder nuts 1 lightly.
After installing handlebars, it should be tightend to the specified
torque.
• Install the steering stem upper bracket and tighten the steering
stem nut lightly.
• Install the front fork to the steering stem and tighten the lower
clamp bolts temporarily.
• Tighten the steering stem head nut to the specified toupue.
Steering stem head nut: 65 N . m (6.5 kgf . m, 47.0 lb-ft)
FRONT FORK
• Remount the front forks. (
HANDLEBARS
• Set the punched mark to the mating surface of the handlebar
holder.
www.GSX1400FE.com
7-29)
6-17)
CHASSIS 6-29