Suzuki GSX1400 Service Manual page 179

4-60 FI SYSTEM
• Apply thread lock "1342" to the actuator cover nuts and tighten
them.
99000-32050: THREAD LOCK "1342"
STVA cover nut: 2.0 N . m (0.2 kgf . m, 1.5 lb-ft)
• Install the fast idle cam and tighten its mounting nut.
Fast idle cam mounting nut: 4.0 N . m (0.4 kgf . m, 3.0 lb-ft)
• Position the TV control lever between the TV synchronizing
screw and spring as shown.
• Set each TV to the same opening by turning the balance screws.
NOTE:
Apply grease "A" to the screw end and spring if necessary.
• Position the STV control lever between the STV balance screw
and spring as shown.
www.GSX1400FE.com