Using Windows NT online diagnostic tools
Using TCP/IP diagnostic tools
Introduction
This section describes the following TCP/IP diagnostic tools available for
the network adapter. These tools are useful for diagnosing LAN
communication problems. The first three tools are the most useful:
ipconfig (below)
ping (page 46)
tracert (page 47)
arp (page 49)
nbtstat (page 50)
netstat (page 52)
These utilities help you to verify network connectivity. Network
connectivity is essential to CallPilot operation. These utilities help you to
thoroughly test the network interface and isolate any configuration
problems.
The ipconfig command
The ipconfig command displays IP configuration information.
Ipconfig default
If you run the command without flags, it displays the IP address, subnet
mask, and default gateway for each adapter bound to TCP/IP.
Ipconfig command syntax
ipconfig /[ ]
44
Standard 1.0
CallPilot