Integrated Digital Access (Ida) Equipment; Contents; Dass2 Hardware Requirements - Nortel Communication Server 1000 Manual

.
Integrated Digital Access (IDA)
equipment

Contents

This section contains information on the following topics:
"DASS2 hardware requirements" (page 77)
"NT5K35, NT5K75 and NT6D11AE DCHI cards" (page 83)
"NT8D72 PRI" (page 85)
"NT5D97AD Dual-port DTI2/PRI2 card" (page 87)
"Hardware required for DDP2 configuration" (page 111)
"Clock Controller" (page 112)
"Schematics" (page 114)
"Cabling requirements" (page 117)

DASS2 hardware requirements

The following hardware is required for each DASS2 link on large and Small
Systems:
•
one NTAG54 Dual Daughterboard for NT5D97AD or higher vintages of
the DDP2. The system supports DASS2/DPNSS for DDP2 only from
the NT5D97AD vintage and up.
or
•
one NT5K35 D-channel Handler Interface
or
•
one NT5K75 D-channel Handler Interface - an enhanced version of the
NT5K35 which provides up to 160 D-channel port addresses. This card
supports two switch-selectable modes of operation - standard mode
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
77