Table of Contents
Advertisement
Diagnostics Menu
Entering Diagnostics Menus
1. Turn off the printer.
2. Press and hold the 3 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available tests
Tests appear on the LCD in the order shown:
SENSOR TESTS
PRINTER SENSOR TESTS
ADF/SCANNER SENSOR
TESTS
FINISHER SENSOR TESTS
MOTOR TESTS
PRINTER MOTOR TESTS
ADF/SCANNER MOTOR
TESTS
FINISHER MOTOR TESTS
PRINT TESTS
Tray [x]
Multi-Purpose Feeder
Print Quality Pages
Print defects guide
HARDWARE TESTS
Panel Test
Button Test
DRAM Test
Serial 1 Wrap
USB HS Test Mode
DUPLEX TESTS
Quick Test
INPUT TRAY TESTS
Feed Tests
See
"SENSOR TESTS" on page
See
"PRINTER SENSOR TESTS" on page
See
"ADF/SCANNER SENSOR TESTS" on page
See
"FINISHER SENSOR TESTS" on page
See
"MOTOR TESTS" on page
See
"PRINTER MOTOR TESTS" on page
See
"ADF/SCANNER MOTOR TESTS" on page
See
"FINISHER MOTOR TESTS" on page
See
"PRINT TESTS" on page
See
"[Input Source] Print Test" on page
See
"Print Quality Pages (Diagnostics Menu)" on
page
3-25.
See
"HARDWARE TESTS" on page
See
"Panel Test" on page
See
"Button Test" on page
See
"DRAM Test" on page
See
"Serial Wrap 1 Test" on page
See
"DUPLEX TESTS" on page
See
"Quick Test (Duplex)" on page
See
"INPUT TRAY TESTS" on page
See
"Feed Tests (Input Tray)" on page
3-29.
3-29.
3-29.
3-30.
3-23.
3-23.
3-24.
3-24.
3-25.
3-25.
3-22.
3-22.
3-22.
3-22.
3-22.
3-20.
3-20.
3-23.
3-23.
Diagnostic aids
7558-xxx
Previous
Next
Go Back
3-17
Advertisement
Table of Contents
