Table of Contents
Advertisement
Release the hooks securing the sensor (punch carriage shift HP) (C) to the bracket (A).
5.
A
6.
Remove the sensor (punch carriage shift HP) (C).
Sensor (punch hole select), sensor (punch cam front), and sensor (punch unit HP)
removal
1.
Open the finisher front door assembly.
Remove the rear upper cover. See
2.
3.
Remove the punch carriage assembly. See
Remove the screw securing the bracket (A) to the punch unit assembly (B).
4.
C
"Rear upper cover removal" on page
B
"Punch carriage assembly removal" on page
A
B
7558-xxx
4-380.
4-375.
Repair information
4-397
Previous
Next
Go Back
Advertisement
Table of Contents
