Sensor (Media Level) Removal - Lexmark X95 series Service Manual

7558-xxx
Gently slide the sensor (image calibration) out and remove it.
14.

Sensor (media level) removal

This removal procedure applies to trays 1–4.
Remove the appropriate feeder unit. See
1.
media feeder removal" on page
tray 3 feeder removal" on page
Release the tabs (A) securing the sensor (media level) to the assembly.
2.
3. Remove the sensor (media level).
Service Manual
4-154
"Printer tray 1 feeder removal" on page
4-281, "TTM tray 4 media feeder removal" on page
4-290.
4-144, "Tray module
4-294, or
"TTM
Previous
Next
Go Back