Scanner Carriage Motor Removal - Lexmark X95 series Service Manual

7558-xxx
Remove the LED exposure bar from the underside of the carriage.
3.
Disconnect the cable (B).
4.

Scanner carriage motor removal

Remove the rear upper cover. See
1.
Remove the scanner rear cover. See
2.
3. Remove the scanner top cover. See
Release the clamp (A) from the machine.
4.
Note: Make sure the release hook is pressed or the connection will be damaged.
Service Manual
4-236
"Rear upper cover removal" on page
"Scanner rear cover removal" on page
"Scanner top cover removal" on page
4-19.
4-20.
4-22.
Previous
Next
Go Back