Table of Contents
Advertisement
Remove the booklet knife sector drive gear 42T (A).
5.
A
Booklet media entrance drive motor removal
Remove the booklet unit assembly. See
1.
Remove the screws securing the booklet media entrance drive motor cover from the booklet unit.
2.
Remove the booklet media entrance drive motor cover.
3.
Disconnect the connectors from the booklet media entrance drive motor (A).
4.
5.
Remove the two screws securing the booklet media transport from the knife solenoid frame.
B
Rear
"Booklet unit chassis removal" on page
7558-xxx
4-335.
Repair information
4-329
Previous
Next
Go Back
Advertisement
Table of Contents
