Sensor (Upper Media Exit) Late Jam - Lexmark X95 series Service Manual

7558-xxx
Step Action and questions
Check the sensor (upper media
3
exit) for proper connection.
Is the above component
properly connected?
Check the finisher controller
4
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?

485.03 Sensor (upper media exit) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (upper media
2
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
3. Touch Sensor (upper media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (upper media
3
exit) for proper connection.
Is the above component
properly connected?
Service Manual
2-224
Yes
Replace the sensor (upper media
exit).
Go to
"Sensor (upper media
exit) removal" on page 4-406.
Go to Step 5.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-353.
Yes
Go to step 2.
Go to Step 4.
Replace the sensor (upper media
exit).
Go to
"Sensor (upper media
exit) removal" on page 4-406.
No
Replace connections.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to Step 3.
Replace connections.
Previous
Next
Go Back