Sensor (Upper Media Exit) Removal - Lexmark X95 series Service Manual

7558-xxx
Move the bracket (B) frontward again, and remove the screw securing the sensor (upper media bin full) (C)
5.
to the bracket.
Remove the sensor (upper media bin full) (C).
6.
Disconnect the connector from the sensor (upper media bin full) (C).
7.

Sensor (upper media exit) removal

Open the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
Remove the upper media bin assembly. See
3.
4. Remove the top cover. See
Service Manual
4-406
A
B
Harness clamp
Front
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
"Top cover removal" on page
Front
C
A
4-380.
4-421.
Previous
Next
Go Back
4-422.