Table of Contents
Advertisement
7558-xxx
Remove the bridge unit top door spring.
7.
Reinstallation note: Ensure that the inner guide springs are properly reinstalled.
Decurler clutch removal
Remove the bridge unit assembly. See
1.
2.
Remove the bridge decurler rear cover. See
page
4-319.
Release the hooks (A) securing the sensor flag to the machine.
3.
Remove the sensor flag.
4.
5.
Remove the screw (B) securing the bracket to the machine.
Service Manual
4-310
"Bridge unit assembly removal" on page
"Sensor (decurler cover interlock) removal" on
4-305.
Previous
Next
Go Back
Advertisement
Table of Contents
