Table of Contents
Advertisement
7558-xxx
Step
Action and questions
Check the ADF registration motor
6
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF registration
motor.
Does the above component
operate properly?
Check the ADF registration motor
7
for proper connection.
Is the above component
properly connected?
Check the ADF nip release
8
solenoid for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF nip release
solenoid.
Does the above component
operate properly?
Check the ADF nip release
9
solenoid for proper connection.
Is the above component
properly connected?
Place an undamaged document
10
in the ADF, and perform an ADF
test.
Does the error remain?
Service Manual
2-142
Yes
Go to step 8.
Replace the ADF registration
motor. Go to
"ADF registration
motor removal" on page
4-218.
Go to step 10.
Replace the ADF nip release
solenoid. Go to
"ADF nip
release solenoid removal" on
page
4-216.
Replace the ADF controller
PCBA. Go to
"ADF controller
PCBA removal" on page
4-203.
No
Go to step 7.
Replace the connections.
Go to step 9.
Replace the connections.
Problem resolved
Previous
Next
Go Back
Advertisement
Table of Contents
