Diagnostics Menu; Entering The Diagnostics Menu; Registration - Lexmark MX310 Service Manual

Paper Menu Reports
Help Manage Shortcuts
Print All Guides Fax Shortcuts
Copy Guide E-mail Shortcuts
E-mail Guide FTP Shortcuts
Fax Guide Copy Shortcuts
FTP Guide Profile Shortcuts
Print Defects Guide
Information Guide
Supplies Guide
1
Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
2
Depending on the printer setup, this menu item appears as Standard Network or Network [x].
3
This menu is supported only in select printer models and appears only when one or more DLEs are installed.
4
This menu is supported only for MX410, MX510, and MX511.

Diagnostics menu

Entering the Diagnostics menu

1
Turn off the printer.
2
Press and hold 3 and 6 while turning on the printer.
Release the buttons when the splash screen appears.

Registration

These settings adjust the margins of the black plane.
To set the Registration:
1
Print a Quick test page.
a
From the Diagnostics menu, navigate to:
Registration > Quick Test
b
Retain this page to determine the changes you need to make to the margin settings. The alignment
diamonds in the margins should touch the margins of the page.
The Quick test page contains the following information:
•
Printer registration settings
•
Code levels
•
Alignment diamonds at the top, bottom, and each side
•
Horizontal lines for skew adjustment
•
General printer information, including current page count, installed memory, processor speed, serial
number, engine ID, and system card ID
2
Change the value of any of the margin settings.
Network/Ports Security
3,4
Option Card Menu
Note: A list of
installed DLEs
(Download
Emulators) appears.
Service menus
220
7015
Settings