Table of Contents
Advertisement
7558-xxx
Step
Action and questions
Check the sensor (2nd transfer
2
roll retract HP) for proper
connection.
Is the above component
properly connected?
Check the 2nd transfer roller
3
retract motor for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch 1st transfer roller
retract motor (contracted).
5. Touch 1st transfer roller
retract motor (retracted).
Does the above component
operate properly (motor
rotating)?
Check the 2nd transfer roller
4
retract motor for proper
connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?
154.01 Developer (Y/M/C) motor failure
Step
Action and questions
Check the developer motor for
1
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Developer motor.
Does the above component
operate properly (motor
rotating)?
Service Manual
2-74
Yes
Replace the printer left duplex
door assembly. Go to
"Printer
left duplex door assembly
removal" on page
4-142.
Go to step 5.
Replace the printer left duplex
door assembly. Go to
"Printer
left duplex door assembly
removal" on page
4-142.
Replace the upper printer engine
PCBA.
Go to
"Upper printer engine
PCBA removal" on page
4-187.
Yes
Go to step 3.
No
Replace the connections.
Go to step 4.
Replace the connections.
Problem resolved
No
Go to step 2.
Previous
Next
Go Back
Advertisement
Table of Contents
