Table of Contents
Advertisement
7558-xxx
Remove the HCF media tray front cover (A).
3.
Note: Ensure that the HCF media tray assembly contains no media when the bottom plate (B) is raised after
replacing the HCF media tray front cover (A). A series of clicking sounds will be produced during the calibrating
process of the media level indicator (C).
HCF media tray lift coupling assembly removal
Remove the HCF media tray assembly from the printer. See
1.
page
4-436.
2.
Remove the HCF media feed unit assembly. See
Remove the HCF feed lift motor. See
3.
4.
Use a prying tool to remove the e-clip securing the HCF tray lift coupling (D) to the HCF media feed unit
assembly.
Remove the HCF tray lift coupling (A).
5.
Remove the spring (B).
6.
7.
Remove the HCF tray lift gear - 40 tooth (C).
Service Manual
4-438
B
"HCF feed lift motor removal" on page
C
B
A
"HCF media tray assembly removal" on
"HCF feed unit removal" on page
E-clip
C
A
4-432.
4-430.
Previous
Next
Go Back
Advertisement
Table of Contents
