Sensor (Tray 2 Feed-Out); Tray Module Media Transport Roll Assembly; Tray Module Drive Motor; 1Tm Controller Card Assembly - Lexmark X95 series Service Manual

Hide thumbs Also See for X95 series:

Table of Contents

Sensor (tray 2 feed-out)

The sensor (tray 2 feed-out) detects media fed from the tray 2.

The tray module transport roll assembly feeds media from the tray 2.

This motor is used to drive the media transport mechanism in the tray module.

The 1TM controller card assembly, which contains a CPU, controls media feed in the 1TM upon receiving a

command from the upper printer engine card assembly and sensor/switch information.

Diagnostic aids