Table of Contents
Advertisement
7558-xxx
281.03 Sensor (ADF feed out) late jam
Step
Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the ADF rollers for wear.
2
Is the ADF feed/pick roller
assembly or the ADF
separation roller guide
assembly free of excess wear?
Check the sensor (ADF feed out)
3
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF feed
out).
Does the display on the
operator panel change every
time the sensor actuator is
operated?
Check the sensor (ADF feed out)
4
for proper connection.
Is the above component
properly connected?
Check the ADF feed motor for
5
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF feed motor
(forward).
5. Touch ADF feed motor
(reverse).
Does the motor rotate
normally?
Check the ADF feed motor for
6
proper connection.
Is the above component
properly connected?
Service Manual
2-138
Yes
Go to step 2.
Go to step 3.
Go to step 5.
Replace the sensor (ADF feed
out).
Go to
"Sensor (ADF feedout)
removal" on page
4-243.
Go to step 7.
Replace the ADF feed motor. Go
to
"ADF feed motor removal"
on page
4-209.
No
Remove any media or media
fragments.
Clean or replace the ADF feed/
pick roller assembly. Go to
"ADF
feed/pick roller assembly
4-210, or
removal" on page
"ADF separation roller guide
removal" on page
4-223.
Go to step 4.
Replace the connections.
Go to step 6.
Replace the connections.
Previous
Next
Go Back
Advertisement
Table of Contents
