Sensor (Media Level) Removal; Sensor (Media Out) Removal - Lexmark X95 series Service Manual

7558-xxx

Sensor (media level) removal

This removal procedure applies to trays 1–4.
Remove the appropriate feeder unit. See
1.
media feeder removal" on page
tray 3 feeder removal" on page
2. Release the tabs (A) securing the sensor (media level) to the assembly.
Remove the sensor (media level).
3.
Disconnect the harness (B).
4.

Sensor (media out) removal

This removal procedure applies to trays 1–4.
1. Remove the appropriate feeder unit. See
media feeder removal" on page
tray 3 feeder removal" on page
Remove the media out actuator. See
2.
Release the tab (A) securing the sensor (media out) to the assembly.
3.
Remove the sensor (media out).
4.
Service Manual
4-270
"Printer tray 1 feeder removal" on page
4-281, "TTM tray 4 media feeder removal" on page
4-290.
"Printer tray 1 feeder removal" on page
4-281, "TTM tray 4 media feeder removal" on page
4-290.
"Media out actuator removal" on page
4-144, "Tray module
4-294, or
"TTM
4-144, "Tray module
4-294, or
"TTM
4-123.
Previous
Next
Go Back