7558-xxx
Disconnect the cable (B).
6.
Sensor (ADF closed interlock) removal
Remove the operator panel assembly. See
1.
2.
Remove the screw (A).
Release the harness (B) from the clamp.
3.
Disconnect cable (C) to remove the sensor (ADF closed interlock).
4.
Sensor (ADF document set) removal
Remove the ADF rear cover.
1.
Disconnect the cable (A).
2.
Service Manual
4-242
"Scanner controller PCBA removal" on page
"ADF main drive sub assembly removal" on page 4-215
Previous
Next
Go Back
4-238.