Table of Contents
Advertisement
Disable Scanner
Paper Prompts
Envelope Prompts
Action for Prompts
Jobs On Disk
Disk Encryption
Erase All Information on Disk
Wipe All Settings
Font Sharpening
Require Standby
Short-edge Printing
UI Automation
Key Repeat Initial Delay
Key Repeat Rate
Clear Custom Status
USB Speed
Automatically Display Error Screens
Booklet Adjustments
Exit Config Menu
Action for prompts
This setting enables users to determine which input source would receive paper-related or envelope-related
change prompts when they occurred. Regardless of the target source, the device always requires some type of
user assistance to resolve the change prompt (examples: pushing a button to ignore the prompt and changing
the source's installed media). However, this setting gives a user the option of having the device resolve change
prompt situations without requiring any user assistance.
To change this setting:
1.
From the Configuration Menu, navigate to Action for prompts.
Touch
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
When set to Prompt user, the device behaves like the past implementation. When a change prompt occurs, the
device stops printing, posts the change prompt to the target source, and waits for the user to select an action
before continuing.
When set to Continue, the device automatically assumes that the user selects Continue every time a change
prompt is encountered. Likewise, when the device is set to Use Current, all change prompts will perform as if
Use Current was selected by the user.
or
to change the setting.
See
"Disable Scanner" on page
See
"Paper Prompts" on page
See
"Envelope Prompts" on page
See
"Action for prompts" on page
See
"Jobs on Disk" on page
See
"Disk Encryption" on page
See
"Erase all Information on Disk" on page
See
"Wipe All Settings" on page
See
"Font Sharpening" on page
See
"Require Standby" on page
See
"Short-edge Printing" on page
See
"UI Automation" on page
See
"Key Repeat Initial Delay" on page
See
"Key Repeat Rate" on page
See
"Clear Custom Status" on page
See
"USB Speed" on page
See
"Automatically Display Error Screens" on page
See
"Booklet Adjustments" on page
7558-xxx
3-9.
3-13.
3-9.
3-7.
3-11.
3-9.
3-10.
3-16.
3-11.
3-14.
3-14.
3-15.
3-12.
3-12.
3-8.
3-16.
3-8.
3-8.
Diagnostic aids
Previous
Next
Go Back
3-7
Advertisement
Table of Contents
