Table of Contents
Advertisement
Release the hooks securing the sensor to the bracket (B).
5.
6.
Remove the sensor (stacker bin level encoder) (A).
Sensor (stacker bin upper limit) or sensor (stacker bin no media) removal
Remove the rear upper cover. See
1.
Remove the rear lower cover. See
2.
3.
Remove the stacker media bin assembly. See
page
4-429.
Remove the stacker bin lift motor assembly. See
4.
page
4-407.
Remove the four screws securing the metal cover (A) to the finisher.
5.
6.
Remove the metal cover (A).
A
Disconnect the connector from the sensor (stacker bin upper limit) (B) or the sensor (stacker bin no
7.
media) (C).
Release the hooks of the selected sensor.
8.
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"High capacity feeder (HCF) removal procedures" on
"Stacker bin lift motor assembly removal" on
4-380.
4-423.
Right
Repair information
7558-xxx
Previous
Next
Go Back
4-403
Advertisement
Table of Contents
