Finisher Right Carriage Belt Removal - Lexmark X95 series Service Manual

Hide thumbs Also See for X95 series:

Table of Contents

Remove the finisher docking bracket (D).

Reinstallation note: When docking the finisher to the printer, make sure the boss on the finisher docking

bracket (D) is inserted into the hole on the finisher docking latch assembly (C). The finisher should be firmly

locked into position.

Finisher right carriage belt removal

Remove the rear upper cover. See

Remove the finisher front door assembly. See

Move the slip clutch gear 24T (A) toward the rear to disengage the stacker bin (B).

Move the stacker bin (B) to its lowest position.

Note: Make sure the stacker bin is at the lowest position before continuing.

"Rear upper cover removal" on page

"Finisher front door assembly removal" on page

Repair information