Table of Contents
Advertisement
Step
Adjust the fold position fine adjustment value based on the
2
graphic below:
1. Enter the diagnostic mode.
2. Touch ENGINE ADJUST.
3. Touch Booklet fold adjust.
4. Touch Booklet fold pos fine adj.
5. Make required adjustments according to media size.
1 step = .1 mm shift. Target amount to be adjusted is
half the amount of the total Fold Misalignment
6. Touch Submit.
Enter the user mode and print the appropriate booklet using
the booklet maker.
Do the booklet sheet edges appear overlapped as shown in
the graphic below?
Check
Yes
Repeat step 2 until
Problem solved.
the Booklet fold
position fine
adjustment is in
spec.
Repair information
7558-xxx
Previous
No
Next
Go Back
4-471
Advertisement
Table of Contents
