Table of Contents
Advertisement
7558-xxx
Cover removal procedures
Inner cover removal
Remove the printer front door. See
1.
Remove the transfer belt cleaner. See
2.
Remove the waste toner box.
3.
Rotate the transfer belt lever counterclockwise to the unlock position.
4.
5.
Open the printhead retract door.
Remove the four photoconductor units.
6.
Remove the four toner supplies.
7.
Remove the operator panel front cover. See
8.
Remove the printhead retract door. See
9.
10.
Open the printer left duplex door.
Service Manual
4-4
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
4-13.
4-178.
4-8.
4-145.
Previous
Next
Go Back
Advertisement
Table of Contents
