Automatic document feeder (ADF) assembly removal
Disconnect the cable (A) from the flatbed scanner assembly.
1.
Lift the ADF assembly up and away from the flatbed scanner assembly.
2.
Gently press a tool against the plastic tab (B) as shown in the following image.
3.
4.
Lift the ADF assembly and remove it from the machine.
FB CCD sensor assembly removal
Remove the large platen glass. See
1.
Remove the sensor (FB platen length). See
2.
"Large platen glass removal" on page
"Sensor (FB platen length) removal" on page
7558-xxx
4-234.
4-263.
Repair information
4-227
Previous
Next
Go Back