Sensor (Media On Belt) Late Jam - Lexmark X95 series Service Manual

Step Action and questions
Check the sensor (media on belt)
3
for proper connection.
Is the above component
properly connected?
Perform a print test. Go to
4
"PRINT TESTS" on page
Does the error continue?

201.03 Sensor (media on belt) late jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (media on belt )
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (paper on
belt).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (media on belt)
3
for proper connection.
Is the above component
properly connected?
Check the registration drive
4
motor assembly for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration motor.
Does the above component
operate properly?
Yes
Replace the sensor (media on
belt).
Go to
"Sensor (media on belt)
removal" on page
Replace the lower engine PCBA.
3-25.
Go to
"Lower engine PCBA
removal" on page
Yes
Go to step 2.
Go to step 4.
Replace the sensor (media on
belt).
Go to
"Sensor (media on belt)
removal" on page
Go to step 6.
No
Replace the connection.
4-155.
Problem resolved
4-104.
No
Remove any media or media
fragments.
Go to step 3.
Replace the connection.
4-155.
Go to step 5.
Diagnostic information
7558-xxx
Previous
Next
Go Back
2-99