Touch Screen (Mfp) Removal - Lexmark X95 series Service Manual

7558-xxx
Detach the toner smart chip PCB and remove.
3.

Touch screen (MFP) removal

1. Remove the operator panel right cover. See
Remove the operator panel left cover. See
2.
Remove the operator panel front cover. See
3.
Remove the operator panel. See
4.
Remove the operator panel PCBA. See
5.
6. Remove the seven screws (A) securing the shield to the assembly.
Disconnect the cable (B).
7.
Service Manual
4-174
"Operator panel right cover removal" on page
"Operator panel left cover removal" on page
"Operator panel front cover (MFP) removal" on page
"Printer front door removal" on page
"Operator panel PCBA (MFP) removal" on page 4-131
4-11.
4-10.
4-13.
Previous
Next
Go Back
4-8.