Table of Contents
Advertisement
7558-xxx
• Booklet knife solenoid
–
This solenoid transfers the booklet folding/exit drive motor assembly to the knife through the gear.
Booklet media
exit roll assembly
• Sensor (booklet front tamper HP)
–
This photo sensor detects the home position of the booklet front tamper.
• Sensor (booklet rear tamper HP)
This photo sensor detects the home position of the booklet Rear tamper.
–
• Sensor (booklet compile media in)
This photo sensor detects paper present in the booklet compiler tray.
–
–
Booklet front tamper motor
This stepping motor drives the booklet front tamper.
–
• Booklet rear tamper motor
This stepping motor drives the booklet rear tamper.
–
• Sensor (booklet knife HP)
–
This photo sensor detects the home position (stored condition) of knife.
• Sensor (knife folding)
This photo sensor detects the fold position (protruded condition) of knife.
–
• Booklet staple assembly
This booklet stapler consist of two stapler units (including stapler low switch) and booklet stapler head
–
motor.
• Booklet paddle motor
This DC motor drives the paddle at the booklet section.
–
• Sensor (booklet end guide HP)
This photo sensor detects the home position of the booklet end guide.
–
• Booklet end guide drive motor
This stepping motor moves the booklet end guide up and down.
–
Service Manual
3-102
Booklet media
entrance roll
assembly
Booklet folding
roll assembly
Sensor (booklet media
exit roll assembly)
Booklet folding/exit
motor assembly
Sensor (booklet
media entrance)
Booklet media entrance
drive motor
Booklet knife solenoid
Previous
Next
Go Back
Advertisement
Table of Contents
