Table of Contents
Advertisement
7558-xxx
Remove the finisher diverter gate solenoid (A).
7.
Note: The link (C) may remain inserted into the finisher.
Connector
Remove the link.
8.
Note: When the link is removed, the finisher diverter gate may become detached. See
gate removal" on page
Finisher front door assembly removal
Open the finisher front door assembly (A).
1.
Remove the three screws securing the finisher front door assembly.
2.
Service Manual
4-348
B
Clamp
)
C
4-347.
Clamp
A
C
"Finisher diverter
Previous
Next
Go Back
Advertisement
Table of Contents
