Table of Contents
Advertisement
7558-xxx
Remove the two screws securing the right eject cover (A) to the finisher.
3.
Right
Remove the right eject cover (A).
4.
Sensor (booklet compiler media entrance) removal
Remove the booklet unit chassis. See
1.
2.
Remove the booklet unit assembly left cover. See
page
4-334.
Disconnect the connector from the sensor (booklet compiler media entrance) (A).
3.
Remove the screw securing the sensor (booklet compiler media entrance) bracket from the booklet unit
4.
chassis.
Remove the screw securing the sensor (booklet compiler media entrance) (A) from the bracket.
5.
Remove Sensor (booklet compiler media entrance) (A).
6.
Service Manual
4-382
A
"Booklet unit chassis removal" on page
Left
"Booklet unit assembly left cover removal" on
Connector
A
4-335.
Previous
Next
Go Back
Advertisement
Table of Contents
