Table of Contents
Advertisement
Step
Action and questions
Check the transport rollers for
3
wear.
Is the above component free of
excess wear and damage?
Check the sensor (tray 5 feed
4
out) for proper connection.
Is the above component
properly connected?
Check the HCF feed/lift motor for
5
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch HCF feed/lift motor
(feed).
5. Touch HCF feed/lift motor
(lift).
Does the above component
operate properly?
Check the HCF feed lift motor for
6
proper connection.
Is the above component
properly connected?
Check the HCF transport motor
7
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch HCF transport motor.
Does the above component
operate properly?
Check the HCF transport motor
8
for proper connection.
Is the above component
properly connected?
Yes
Go to step 4.
Clean or replace the sensor (tray
5 feed out). Go to
"HCF sensor
(tray 5 feedout) removal" on
page
4-443.
Go to step 7.
Replace the HCF feed lift motor.
Go to
"HCF feed lift motor
removal" on page
4-430.
Go to step 9.
Replace the HCF transport
motor. Go to
"HCF transport
motor removal" on page
4-449.
7558-xxx
No
Replace the transport rollers.
Go to
"HCF transport roller kit
removal" on page
4-449.
Replace the connection.
Go to step 6.
Replace the connections.
Go to step 8.
Replace the connections.
Diagnostic information
Previous
Next
Go Back
2-131
Advertisement
Table of Contents
