Changing the Initial Value of Each Function
You can change settings that require administrator rights on the following menus.
Administrator Setup
"Copy Function"
Copy Setup
"Fax Function"
Fax Setup
"FaxServer Function"
FaxServer Function
"Internet Fax Function"
Internet Fax Setup
"Scanner Function"
Scanner Setup
"USB Memory Print Function"
Print From USB Memory Setup
"Printer Function"
Print Setup
"Network"
Network Menu
"Management"
Management
"Operation Initial Setting"
User Install
1.
Press
(SETTING).
2.
Press
to select [Easy Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select the menus on which you want to change the settings, and then press
6.
Change the settings, and then press
In the case of [Easy Setup], repeat step 6 until a message indicating the setting is complete is displayed.
Memo
If you have made a change to initial values from the [Admin Setup] menu and wants to reflect the new values immediately on the
Start screen, press
(PRINT), or
(FAX).
(OK).
(RESET/LOG OUT) or press one of the following function switch buttons,
(OK).
(OK).
1037
.
(COPY)
(SCAN),