Setting To Send An E-Mail From This Machine - Oki MB472dn User Manual

Setting to Send an E-mail from This Machine

You can set an e-mail alert by using the Web page.
Memo
If you have set Scan to E-mail and Internet Fax on the machine, which is described in
This Machine", the server setting is complete.
If you specify a domain name in [SMTP Server], set the DNS server for the [TCP/IP] setting.
You must set the mail server to allow the machine to send an e-mail. For details on the mail server setting, contact your network
administrator.
If you use Internet Explorer, set the following before you send a test mail. In the Web browser, select [Tool] > [Internet Options],
and then click [Custom Level] on the [Security] tab. Then, select [Enable] in [Allow websites to prompt for information using
scripted windows].
1.
Open the Web page of this machine.
About the IP Address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [E-mail] > [Alert Settings].
5.
Specify detailed settings by following the on-screen instructions.
6.
Select [Set detail of the SMTP Protocol].
7.
Set [Security Settings], [Configure attached information], and [Others] if necessary.
8.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
"Checking and Changing the Settings of
1012