Creating A Certificate - Oki MB472dn User Manual

Creating a Certificate

You can create a certificate on the Web page. You can use the following three certificates.
Pre-installed certificate
Self-signed certificate
Authority-issued certificate
Note
Before you create a certificate, be sure to delete the pre-installed certificate.
If you change the IP address of this machine after creating the certificate, the certificate becomes invalid. Be sure not to change
the IP address of this machine after creating the certificate.
1.
Open the Web page of this machine.
About the IP address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [Security] > [SSL/TLS].
5.
Specify detailed settings by following the on-screen instructions.
Memo
The IP address of this machine is set to [Common Name].
6.
Check the settings, and then click [OK].
In the case of a self-signed certificate, close the Web page by following the on-screen instructions, proceed to
Encryption Settings".
If you want to obtain a certificate issued by the certificate authority, proceed to step 7.
7.
Send the CSR to a certificate authority by following the on-screen instructions.
8.
Click [OK].
9.
Install a certificate from a certificate authority by following the on-screen instructions.
10.
Click [Submit].
Proceed to "Enabling Encryption Settings".
1069
"Enabling