Limiting By Using Mac Address (Mac Address Filtering) - Oki MB472dn User Manual

Limiting by Using MAC Address (MAC Address Filtering)

You can control access to the machine by using MAC address. You can allow for or reject access from a specified MAC address.
Note
Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow for access to the machine from a
network.
1.
Open the Web page of this machine.
About the IP address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to login to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [Security] > [MAC Address Filtering].
5.
Specify detailed settings by following the on-screen instructions.
Note
If nothing is registered in [Administrator's MAC Address to Register], access to the machine may not be allowed depending
on the specified MAC address.
If you use a proxy server, [Your Current Local Host/Proxy MAC Address] and the MAC address of your host may not match.
6.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
Memo
You cannot specify to accept or to reject for each address.
1063