Entering Characters
6.
Press [OK].
A confirmation screen is displayed.
Using a Registered Macro
You can use a macro by reading out it.
1.
Press [Job Macro] on the touch panel.
2.
Select a macro to use, and then press [Apply].
If the access control is enabled on the functions you want to use, a message is
displayed to inform you that you are not permitted to use them, and the screen
returns to the JOB MACRO menu.
3.
Perform a job.
Editing a Macro Title
You can edit a macro title.
1.
Press [Job Macro].
2.
Press [Edit].
3.
Select a macro, and then press [Title Edit].
4.
Enter a new title.
Entering Characters
5.
Press [OK].
Checking the Macro Content
1.
Press [Job Macro].
2.
Select a macro, and then press [Description].
3.
Check the content, and then press [Back].
If you press [Apply] instead of [Back], the macro is applied.
Deleting a Registered Macro
You can delete a macro.
1.
Press [Job Macro].
915